IPC-540 Quiet Safety Wallmount Industrial Chassis Supports MICROATX Motherboard

The IPC-540+ is the slimmest model in the wall-mount range: only 158 mm high, 355 mm wide and 308 mm deep, yet it still accepts a microATX board, a standard PS2 ATX power supply and two 80 x 80 x 25 mm ball bearing fans. That combination matters where vertical clearance is the constraint, such as inside machine bases, above suspended ceilings, in kiosk housings and in retrofit cabinets that were originally sized for a much smaller controller.

Two fans rather than one give the enclosure headroom for a discrete graphics card or a multi-port network card without pushing fan speed up, so acoustic output stays low during long shifts. The drive cage can be configured as one 3.5 inch plus one 2.5 inch drive, or as two 2.5 inch drives for a fully solid-state build that resists shock and vibration on mobile equipment.

• Motherboard support: Mini-ITX, microATX, so one enclosure covers several board families and reduces spare parts inventory.
• Drive configuration: One internal 3.5 inch and one 2.5 inch bay, or two 2.5 inch bays, mounted internally to keep cabling clear of the airflow path.
• Cooling: Two 80 x 80 x 25 mm ball bearing fans, tested for continuous duty in unattended installations.
• Power supply: PS2 ATX power supply, a widely available format that avoids proprietary sourcing risk.
• Front panel: HDD active and system power LEDs, system reset switch and ATX power switch, two USB type A connectors.
• Chassis dimension: 355 mm x 158 mm x 308 mm (W x H x D), suited to wall, panel or machine frame mounting.
• Finish: powder-coated beige steel with deburred edges and captive thumbscrews on the service cover.
• Service access: board area, drive cage and fan mounts reachable from a single opening for fast field repair.

The IPC-540+ is specified for industrial PCs in packaging and labelling machines, small vision controllers, digital signage players, kiosk computers, access control head-end units and laboratory instruments. Its low height lets integrators mount the enclosure where a 190 mm tall chassis would not fit, and the wall brackets accept both panel and machine-frame mounting patterns.

On the front panel, two USB type A ports, an ATX power switch and a reset switch sit beside HDD activity and power LEDs, giving technicians a fast way to power cycle and check the system without opening the case. Internally, the board, drive cage and fan mounts are accessible from one opening, so a fan or drive change does not require dismantling the build.