Expandable Wallmount Industrial Chassis IPC-410 ATX Board Support Dual 120mm Fans

The IPC-410 is built around storage expansion in a wall-mount format. Two internal 3.5 inch bays, or one 3.5 inch bay plus a 2.5 inch SSD, let a build run mirrored data drives, a system disk plus a recording drive, or a local backup volume without stepping up to a rack chassis. Its 330 mm x 190 mm x 350 mm body still mounts on a wall panel, so the enclosure can live inside a plant room or cabinets where rack rails are simply not available.

Full ATX industrial boards are supported alongside microATX and Mini-ITX, which means standard six or seven slot layouts and cost-effective desktop-class processors can be used in place of proprietary industrial boards. Dual 120 x 120 x 25 mm ball bearing fans keep both the board area and the drive cage supplied with air, an important detail for builds that write continuously to spinning disks.

• Motherboard support: Mini-ITX, microATX, ATX industrial motherboards, so one enclosure covers several board families and reduces spare parts inventory.
• Drive configuration: Two internal 3.5 inch bays, or one 3.5 inch bay and one 2.5 inch bay, mounted internally to keep cabling clear of the airflow path.
• Cooling: Two 120 x 120 x 25 mm ball bearing fans, tested for continuous duty in unattended installations.
• Power supply: PS2 ATX power supply, a widely available format that avoids proprietary sourcing risk.
• Front panel: HDD active and system power LEDs, system reset switch and ATX power switch, two USB type A connectors.
• Chassis dimension: 330 mm x 190 mm x 350 mm (W x H x D), suited to wall, panel or machine frame mounting.
• Finish: powder-coated beige steel with deburred edges and captive thumbscrews on the service cover.
• Service access: board area, drive cage and fan mounts reachable from a single opening for fast field repair.

Typical deployments are NVR and video analytics servers recording to mirrored drives, factory data historians, branch office file and backup servers, laboratory instrument controllers, and industrial PCs running simulation or inspection software with several add-in cards. The wall-mount design also suits mobile equipment rooms on trailers and vessels, where vibration and space both constrain enclosure choice.

The front panel provides two USB type A ports, an ATX power switch and a system reset switch, with HDD activity and power LEDs visible at all times. The top cover is retained by thumbscrews and opens to expose the drive cage, fan mounts and expansion slots in a single working area, which shortens mean time to repair during drive or card swaps.