ATX Wallmount Industrial Chassis IPC-307 Full-Size Board Enclosure Dual 120mm Fans

The IPC-307 removes the usual compromise in wall-mount enclosures: it accepts a full-size ATX industrial motherboard, so a build can use a standard 12 x 9.6 inch board with six or seven expansion slots instead of being forced onto microATX. At 320 mm wide, 180 mm high and 330 mm deep, it still hangs on a wall panel or machine frame, which makes it the practical choice when a project needs full ATX slot capacity but has no floor or rack space.

Cooling is handled by two 120 x 120 x 25 mm ball bearing fans, one feeding the board area and one moving air across the drive cage and expansion card zone. For multi-card builds such as vision systems with two frame grabbers, industrial firewalls with quad LAN cards or storage nodes with a RAID controller plus HBA, that second fan is what keeps slot temperatures inside the operating range during continuous duty.

• Motherboard support: Mini-ITX, microATX, ATX industrial motherboards, so one enclosure covers several board families and reduces spare parts inventory.
• Drive configuration: One internal 3.5 inch and one 2.5 inch bay, or two 2.5 inch bays, mounted internally to keep cabling clear of the airflow path.
• Cooling: Two 120 x 120 x 25 mm ball bearing fans, tested for continuous duty in unattended installations.
• Power supply: PS2 ATX power supply, a widely available format that avoids proprietary sourcing risk.
• Front panel: HDD active and system power LEDs, system reset switch and ATX power switch, two USB type A connectors.
• Chassis dimension: 320 mm x 180 mm x 330 mm (W x H x D), suited to wall, panel or machine frame mounting.
• Finish: powder-coated beige steel with deburred edges and captive thumbscrews on the service cover.
• Service access: board area, drive cage and fan mounts reachable from a single opening for fast field repair.

This chassis suits machine vision stations, industrial servers running on ATX boards, DVR and NVR builds with multiple capture cards, factory data concentrators, telecom edge nodes and laboratory instruments that need more than four expansion slots. The wall-mount format also fits portable test rigs and mobile service carts, where the enclosure travels with the equipment instead of living in a rack.

Drive flexibility covers both common scenarios: one 3.5 inch drive plus one 2.5 inch SSD for system and data separation, or two 2.5 inch drives where shock and vibration resistance matters more than bulk capacity. Front access to two USB type A ports, the reset switch and the ATX power switch keeps commissioning simple, and the HDD activity and power LEDs let operators confirm system state at a glance.